How to setup Controller WiFi

Below you will find multiple versions of the same tutorial for Setting Up and Adding a JellyFish Lighting Controller to a Local Wi-Fi Network, as well as updating the firmware. (*The Controller Wi-Fi may need to be reset.)

Step-by-Step App Video Tutorial

On a mobile device? Select to view the video on YouTube — you can then choose to watch it full screen in vertical mode.

Mobile Step-by-Step Image Tutorial

How to Add a Controller – Mobile Tutorial

*Reset the Controller Wi-Fi If Needed

If the controller has been previously added to a network, you’ll need to reset the Wi-Fi before adding it to a new network. This is required if there’s been a password change, new router, or location change. To do this:

1. Tap the Menu button on the Controller to wake it up (screen illuminates).
   
2. Press and hold the Menu button on the Controller for 10 seconds until you see the “Service Menu” appear.
3. Use the Up and Down arrows to find WiFi Reset.
4. Press the OK button on the Controller.
5. Wait for the Wi-Fi to reset.
6. Now proceed to adding the Controller to Wi-Fi.